Mosquito with reference, should be more stable, eliminates environment fluctuations.
Custodian : SENSORICA
|Record created date||Feb. 12, 2013|
|Record created by||None|
Jonathan, to assemble the electronics layer for the first 850nm LED Mosquito prototype
Testing Laser Driver for 850 Mosquito 7h55
Working on Laser Driver for 850 Mosquito 55m
Working on Laser Driver for 850 Mosquito 5h07
Working on Laser Driver for 850 Mosquito 3h
Clone 850 Mosquito 1h50
850 mosquito filter 1h30
new filter design and cloning 850 mosquito electronics 7h25
cloning 850 mosquito assembly 5h30
cloning 850 mosquito assembly 5h
Yesterday I worked with Jonathan on the 850nm Mosquito
We made some tests using a red high power LED,
We tested it with a joint-type transducer and with a constriction transducer.
The signal we get is small, but very stable. We have a good signal to noise ratio. We have some ideas about amplifying the signal
On the 26th April I worked a little more with Jonathan on the 850nm LED Mosquito. I did the opto-mechanical assembly of the device, using the Thorlabs pieces that we've recently ordered. I also had to mount a lens that I had in stock, harvested from some old scanners, in order to focus the light.