SENSORICA Value Network | Process: Create Prototype 1ax (buzzer) stack low cost, long range v4 starting 2014-11-02 ending 2014-11-30

Process: Create Prototype 1ax (buzzer) stack low cost, long range v4 starting 2014-11-02 ending 2014-11-30

If you were logged in and working on this process, you would log your work on this page.

Outputs

Scheduled:

Unplanned Production:

Created: Prototype Mechanical - Manipulator actuator mechanical: Prototype 1ax (buzzer) stack low cost, long range v4 1.00 None Nov. 30, 2014

Work

Planned Work: (Requirements are ordered by due date)

Unplanned Work:

Work event: Work - Documenting 1.00 Time - Hours Nov. 2, 2014 Done by Tibi

I had to document the work, upload the model online, update the R&D doc, arrange the VAS, etc.

Work event: Work - R&D mechanics 2.00 Time - Hours Oct. 30, 2014 Done by Daniel

Helped Tibi to print the parts. Needed to adapt the 3D model for printing, print, test.

Work event: Work - Accounting and Finance 4.00 Time - Hours Oct. 29, 2014 Done by Tibi

Assembled the piezo membranes on the plastic supports.
The supports were designed by Tibi with Daniel's help.
The supports were printed by Daniel.
See more in the R&D document.

Citations

Design Mechanical - Manipulator actuator

Onhand: Design Actuator 1ax (buzzer) stack low cost, long range v4

Cited: 1.00 Idea Nov. 2, 2014

Onhand: Design Actuator 1ax (buzzer) stack low cost, long range v1

Onhand: Design - Long-range linear piezo motor

Onhand: Design Piezo Motor linear stage V1

Onhand: Design Piezo Motor Linear Stage V2

Onhand: Mechanical design of Tilt piezo motor

Onhand: Piezo Actuator 2 ax (tube) V3 - for the Mosquito

Onhand: Piezo Actuator Design 3 ax (stack+tube) V2 - for the Mosquito

Onhand: Piezo Actuator Design 3 ax V1 (stack+tube) - for the Mosquito

Onhand: Piezo Design Actuator 1 to 3 ax (stack) short range

Consumable Inputs

Consumable - DLF 3D printing resin: 0.01 Volume - L due Nov. 2, 2014

Used to print the supports of the piezo membrane pairs

Onhand: B9R-1-Red ~ 1.12 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: SENSORICA ~ Manager: Daniel ~ Manager: Tibi

Onhand: Spot-E ~ 1.00 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: SENSORICA ~ Manager: Daniel ~ Manager: Tibi

Onhand: Spot-GP ~ 1.50 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: SENSORICA ~ Manager: Daniel ~ Manager: Tibi

Onhand: Spot-HT ~ 0.99 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: SENSORICA ~ Manager: Daniel ~ Manager: Tibi

Onhand: SubG+ ~ 3.28 Volume - L ~ Location: Sensorica Main Lab ~ Custodian: SENSORICA ~ Manager: Tibi ~ Manager: Daniel

Usable Inputs

Equipment - Mechanical - 3D printer: 1.00 Time - Hours due Nov. 2, 2014

Onhand: 3D printer - Phil's 1.00 Each

Onhand: B9Creator 1.00 Each

Used: B9Creator 2.00 Time - Hours Oct. 21, 2014 by Manipulator - low cost piezo

Onhand: Ethienne's Wilson TS 1.00 Each

Onhand: ORD Solutions FDM Printer 1.00 Each

Process context:

Pattern: Generic R&D
Context: Manipulator - low cost piezo

Previous processes:

Make Piezo Actuator Design 3 ax V1 (stack+tube) - for the Mosquito and Piezo Actuator - Design - Mechanical starting 2012-03-01 ending 2012-03-31

Piezo Actuator Design 3 ax (stack+tube) V2 - for the Mosquito and Piezo Actuator - Design - Mechanical starting 2013-06-01 ending 2013-07-01

Piezo Design Actuator 1 to 3 ax (stack) short range and Piezo Actuator - Design - Mechanical starting 2013-10-01 ending 2013-10-31

Make Piezo Actuator - Design - Mechanical 2ax to piezo order starting 2013-11-12 ending 2013-12-27

Design a low cost long range piezo stack starting 2013-12-09 ending 2013-12-31

Design Piezo Motor linear stage starting 2014-02-01 ending 2014-03-28

Design Piezo Motor linear stage V2 starting 2014-03-16 ending 2014-03-28

Next processes:

Process notes:

Make a 4th working model, improved prototype of the long-range piezo buzzer-based linear actuator.